Motor Description- BO4221 Series Motors are Brushless DC Outrunner motors with 42mm diameter. These Motors are available with sensor and without sensor. Robust Ball bearings ensure excellent service life with ≥5000Hrs. Drivers are also available as an Add-On unit on special request. These motors are available in different speeds and different voltages on special request. These Motors are used in combination with many Mechtex gearheads. Depending on the application, output speed, load applied etc the type of gearhead can be selected. Various types of gears i.e poly acetal, sintered iron, brass & steel gears can be used based on the load considerations. Poly acetal or sintered gears usually are used for noise dampening & complete poly acetal gears are used when the output torque required is less. All bearings are permanently lubricated and therefore require no maintenance.
Controller Features:
1. Output Continues current: I = 2.5A Max.
2.Over current protection, Over temperature protection, Low voltage or Over voltage protection, Motor Stalling Protection, Starting protection.
3.Improved torque and response due to sensored and sensorless operation.
3.Excellent low speed response due to sensored and sensorless operation.
5.Forward and reverse Rotation.
6. Motor and Drive enable/ disable.
7.Pulse signal output(PLS) provided for feedback control.
8.Speed variation by internal and external potentiometer.
9.Operating Modes: A)With Hall sensors B)Without Hall sensors
Voltage: 24VDC
No-Load Speed: 6710rpm
No Load Current: 0.23A
Rated Speed: 4994rpm
Rated Current: 2.03A
Rated Torque: 8.3Ncm
Wattage: 50W
Net Weight: 110g
Digital download not available.
